Modify this message : Preparation work before test bench work

Promotion Infomations

Open Directory: *

Information Type: *

CompanyBrandProductSell OfferBuy OfferServicesSolutionsIndustryNews & EventsExhibitionGlossaryKnowledge BaseArticleJobsWebsite & LinksImagesDownloadVenture InvestmentBusiness CooperationSales PromotionOthers

Title: *

Details: *

The EFI test bench produced by Jinan Taixi International Trading Co., Ltd, has been recognized by the market, and its annual sales volume is also in the forefront of the industry. What should the staff do before the EFI test bench starts work? We, Taixi high pressure common rail test bench manufacturer discussed the details of the inspection with friends. 1. Check the coupling If the connection of the output shaft has been removed, when installing the coupling, the dial gauge must be used to adjust it to ensure that it is coaxial with the output shaft. Note that the coaxiality is required to be 0.05mm. Such as different axis will cause vibration. 2. Check whether the protective cover is fixed. The multi-function fuel injector test bed matched with the pump 3. Clamp the high pressure oil pump Use the random clamping attachments to reliably clamp the high-pressure fuel injection pump to the work surface of the test bench, connect it with the main shaft coupling, and then connect the oil pipe between the test bench and the oil pump. If the fuel injection pump used is a distribution pump, you need to connect the 12V/24V power jack to the solenoid valve coil of the distribution pump and select the appropriate voltage. 4. Inject test oil Open the two side doors at the bottom of the EFI test bench. Pay attention to the oil level display tube and do not let oil flow out of the tube. Pull out a fuel tank and pour 60 liters of test oil into the fuel tank. 5. Connect the power cord Make sure that the main power switch at the lower part of the EFI test bench is in the “O” position, open the lower rear door, and lead the uncharged three-phase four-wire cable from the bottom hole of the test bench into the switchboard. If you have a good ground wire, please connect the ground wire together. The EFI test bench produced by Taixi Auto Maintenance Factory has a favorable price and reliable quality. Please feel free to contact us for more questions. https://www.cntestbench.com

Upload Photo:

* (jpg , gif , png) format

Contact Infomations

Full Name: *

Email: *

Mobile:

Company:

Telephone:

Address:

Postcode:

Website:

Options

Keywords:

Period of validity:

* days

Password:*

* You can modify the message with it.

Change Password:

* Reset a New Administrative Password, if need be.

Delete the message

*